專業用于凈化煙塵和微塵，如金屬、塑料件的打磨、研磨和拋光、各類焊接、鉆孔、熱加工、切割粉碎、石材加工、粉末包裝、混合加工等產生的固體顆粒物以及各類粉塵及煙塵的凈化，廣泛應用于船舶、汽車制造，機械加工、五金制造、焊接培訓學校等行業。
Super-Mesa, 1m and 1,4m
蘇帕-馬克西除塵工作臺，工作臺長度1米和1.4米
Mesa is a modern Backdraft Table with built in regulating Damper. 1m and 1.4m Models.
蘇帕-馬克西除塵工作臺是同時結合背吸及吸塵臂兩種捕捉方式、內置風量調節閥的焊接打磨除塵工作臺。除塵工作臺長度有1米和1.4米兩種規格可選。
Dust, Fume and Gases. Super-Mesa is suitable for welding and grinding. It can also be used in many other applications where dust, fume and gases are a problem.
粉塵、煙塵和氣體。 蘇帕-馬克西除塵工作臺適合焊接和打磨工作，廣泛應用于產生煙塵和粉塵的工況。
Funnel-shaped Extraction Openings. The extraction is through the backdraft panel. It′s vertical funnel-shaped extraction openings guarantee maximum efficiency.
漏斗型捕捉開口。通過背吸板捕捉煙塵和粉塵，這種漏斗型捕捉開口確保捕捉效率最大化。
Unique regulating Damper. Super-Mesa is as standard equipped with a regulating damper which makes it possible to adjust the width of the vertical openings of the backdraft panel. If an extraction arm is fitted you can easily adjust the total air volume between the arm and the backdraft panel with a handle on the front side.
獨到的風量調節機構。蘇帕-馬克西除塵工作臺標配背吸板風量調節閥，能夠有效調節背吸板上每條豎直吸風槽的開檔寬度?？梢酝ㄟ^操作人員面前的手柄快速調節背吸式和萬向柔性吸塵臂兩者的風量。
Extraction Arm. For heavy welding the Super-Mesa can be equipped with a Flexi FLB 1.5m extraction arm. If it is needed to reach outside the table you can mount a 2m or a 3m Flexi FLB extraction arm.
萬向柔性吸塵臂。對于焊接量較大的工況，蘇帕-馬克西除塵工作臺配置一套1.5米長度的萬向柔性懸臂用來捕捉煙塵。如有必要，可配置2米和3米長度的萬向柔性吸塵臂以達到所需位置。
Good Grounding. The table surface is just oiled to give a good ground when it is used for welding.
表面。光滑油亮的臺面對焊接和打磨工件無損傷。
Strongly designed. Super-Mesa is designed of 2 and 3mm steel-sheet. The table height can be adjusted from 800-950mm. The side panels can be opened for long objects. Suitable air volume for 1m table is 1300-1700m3/h and for 1.4m table 1500-2200m3/h. It shall be connected with an external fan and extraction system. Connection diameter is 199mm outside.
領先設計。 蘇帕-馬克西除塵工作臺板厚2-3毫米。工作臺高度可在800-950毫米之間調節。側面圍擋可打開并拆卸，用于放置更大、更長工件。1米長度工作臺的推薦風量為1300-1700立方米/小時，1.4米長度工作臺的推薦風量為1500-2200立方米/小時。蘇帕-馬克西除塵工作臺需要外接風機和除塵裝置，接口尺寸為外包直徑199mm。
