專業用于凈化煙塵和微塵，如金屬、塑料件的打磨、研磨和拋光、各類焊接、鉆孔、熱加工、切割粉碎、石材加工、粉末包裝、混合加工等產生的固體顆粒物以及各類粉塵及煙塵的凈化，廣泛應用于船舶、汽車制造，機械加工、五金制造、焊接培訓學校等行業。
Mesa, 1m and 1.4m
馬克西-梅爾薩除塵工作臺，工作臺長度1米和1.4米
Mesa is a modern combined Backdraft and Downdraft Table with built in regulating Damper. 1m and 1.4m Models.
馬克西-梅爾薩除塵工作臺是同時結合底吸、背吸、吸塵臂三種捕捉方式、內置風量調節閥的焊接打磨除塵工作臺。除塵工作臺長度有1米和1.4米兩種規格可選。
Dust, Fume and Gases. Maxi-Mesa is suitable for welding and heavier grinding. It extracts backwards and downwards. Can be used in many other applications.
粉塵、煙塵和氣體。 馬克西-梅爾薩除塵工作臺適合焊接、連續且大工作量的打磨工作，從底部及背部捕捉煙塵、粉塵，應用廣泛。
Unique regulating Damper. Maxi-Mesa is as standard equipped with a regulating damper which makes it possible to adjust the width of the vertical openings of the backdraft panel. You can quickly adjust the total air volume between backdraft and downdraft with a handle on the front side.
獨到的風量調節機構。馬克西-梅爾薩除塵工作臺標配背吸板風量調節閥，能夠有效調節背吸板上每條豎直吸風槽的開檔寬度?？梢酝ㄟ^操作人員面前的手柄快速調節背吸式和底吸式兩者的風量。
Extraction Arm. For heavy welding the Maxi-Mesa can be equipped with a Flexi FLB 1.5m extraction arm. Thanks to the unique regulating damper the total air volume can be divided between backdraft, downdraft and extraction arm.
萬向柔性吸塵臂。對于焊接量較大的工況，馬克西-梅爾薩除塵工作臺配置一套1.5米長度的萬向柔性懸臂用來捕捉煙塵。風量調節閥可有效進行背吸板、底吸板、萬向柔性臂三者之間的風量分配和調節。
Heavy Grinding. For heavy grinding the Maxi-Mesa with a table top of vertical 40x5mm flat bar-irons should be used. Hot particles and sparks will fall down into the dust drawers.
The main air volume should go through the backdraft panel
and, if fitted, the extraction arm, to catch hot fume, dust and
gases which are going upwards.
大工作量打磨。馬克西-梅爾薩除塵工作臺配置了40x5mm豎直風槽用于針對且有效解決大工作量打磨工況問題。滾燙顆粒物和火花會直接進入集塵盒中。風量主要通過背板進入，如已安裝萬向柔性吸塵臂，它將用于捕捉易上升的炙熱煙塵、粉塵及氣體。
Table Top 75mm. Maxi-Mesa can be delivered with a table
top of 75mm wide iron bars with 15mm extraction slots in between.
馬克西-梅爾薩除塵工作臺的臺面由75毫米寬圓棒和15毫米間隙的吸塵窄縫組成。
Maxi-Mesa is designed of 2 and 3mm steel-sheet. The table height can be adjusted from 800-950mm. The side panels can be opened for long objects. Suitable air volume for 1m table is 1500-2000m3/h and for 1.4m table 2000-3000m3/h. It shall be connected with an external fan and extraction system. Connection diameter is 199mm outside.
馬克西-梅爾薩除塵工作臺板厚2-3毫米。工作臺高度可在800-950毫米之間調節。側面圍擋可打開并拆卸，用于放置更大、更長工件。1米長度工作臺的推薦風量為1500-2000立方米/小時，1.4米長度工作臺的推薦風量為2000-3000立方米/小時。馬克西-梅爾薩除塵工作臺需要外接風機和除塵裝置，接口尺寸為外包直徑199mm。
